Water chemistry
Dosing without the guesswork
Test your water, enter the readings, and see at a glance what is in range and what needs a small adjustment.
Working numbers, still being verified. These ranges are being checked by the service team. When in doubt follow the bottle and the official manual.
Your readings
Dip a test strip, then pop the numbers in below.
Optional for now. Dose amounts will use this once our numbers are verified.
Where you sit
Results update as you type your readings.
- pHWaiting for a reading
Target: 7.2 to 7.8
- Sanitiser (free)Waiting for a reading
Target: 3 to 5 ppm
- Total alkalinityWaiting for a reading
Target: 80 to 120 ppm
General guidance for a typical MSpa in NZ conditions. Always follow your specific product label and the Portable Spas NZ Water Care Guide. Not a substitute for testing your own water.
Readings all over the place, or the water still will not come right? Still stuck? Talk to our team.